PLUMBING / LONDON
Plumbing repairs
London.
Find the fault.
A dripping tap, a leaking connection or a sink that will not drain properly. We assess domestic plumbing problems, discuss the repair and check the accessible installation after the work.
Call line 24/7 · Appointment and work confirmed for your job.
Plumbing.
Work worth discussing.
Can you look at a plumbing problem in my London property?
Call with the full postcode, the affected fitting and what has changed. We check the service and available arrangements before agreeing a visit. Photographs of an accessible tap, waste or pipe connection help us understand the enquiry without disturbing the installation.
Can the same visit cover a leak and the damaged finish?
Tell us about both. The source of water needs assessing before the surrounding finish is repaired. Plumbing, drying and making good may be separate parts of the work, and we discuss the order and the trades needed rather than assuming one visit covers everything.
THE SERVICE
The visible drip is where
the enquiry starts.
We carry out plumbing repairs in London for kitchen and bathroom fittings, leaking taps, troublesome sink connections and blocked U-bends. We start by finding out which fitting is affected, when the problem occurs and whether the water is escaping from a supply connection, the tap itself or the waste arrangement. Those distinctions affect the tools, parts and checks needed for the repair.
A cupboard that becomes wet only when a sink is emptied presents a different problem from a supply joint that remains damp while the fitting is unused. We look at the accessible installation and discuss what can be established without opening up the property. We explain when further access or a different investigation is needed before agreeing additional work.
Useful details for your enquiry
- The fitting affected and when the problem first appeared.
- Whether water escapes continuously or only during use.
- Photos showing the connection and the surrounding access.
- Any replacement parts already bought, with product details.
- Damage to the cupboard, flooring, wall or ceiling nearby.
PLAN THIS SERVICE
Describe the plumbing fault
Use the details you know to prepare an enquiry. We assess the condition, materials, access and actual working time before a visit is agreed.
Describe the plumbing fault
Select the work and add relevant quantities or measurements. The result helps us review your enquiry; the final repair and price still need confirming.
WHAT THIS WORK INVOLVES
Dripping or troublesome tap
Tap operation, accessible supply connections and component compatibility.
What we need to check
Limits & related work
Working time needs a job-specific assessment. Measurements and quantities describe the work; they do not establish a completion time or a confirmed price.
Explore a labour budget
- Working duration needs assessment of the fitting and access.
- Any materials, sourcing time and applicable parking or congestion charges are separate.
Your selections stay in this browser until you choose to email them. An email draft does not book a visit. Calculations add no assumed waste or hidden allowances.
Finding where the water starts
We inspect the accessible fitting, connections and the area beneath it. Water can travel along a pipe or the underside of a surface before it falls, so the place where a drop lands is not always the failed component. We check the relationship between the tap, supply connections and waste arrangement and discuss when the fault occurs. A clear account of normal use is more helpful than a guess about which part must be changed.
We also look at the condition of the immediate surroundings. Swollen cupboard material, old staining and damp seals can show that the visible problem has been present for some time. They do not establish the full extent of hidden damage on their own. If the affected connection is boxed in or behind a fixed unit, we explain the access needed and agree what can be done before dismantling or opening finishes.
COMPARE THE WORK
Describe the problem, not just the part
Use these examples to select the closest enquiry. The assessment determines the repair and the parts required.
| Problem | What we assess | What follows the work | What to share |
|---|---|---|---|
| Tap dripping or operating poorly | Tap type, accessible connections and available replacement parts | Operation and accessible leak checks | Make, photographs and any parts supplied |
| Sink draining slowly | Accessible trap and waste arrangement | Drainage through the repaired arrangement | When it happens and what has already been tried |
| Water beneath a basin or sink | Where the water starts and whether it occurs during use | Accessible connections checked during operation | A close view and a wider view of access |
| Visible pipe joint leaking | Material, fitting condition and nearby strain or damage | Repair checked at the accessible joint | Location and whether supply can be isolated |
| Damage around the plumbing | Cause, access and the affected finishes | Discussion of drying or related making-good work | Photos of the fitting and surrounding damage |
Preparing the working area
We need room to reach the fitting, handle tools and catch residual water from a disconnected waste or component. Before the visit, tell us if the cupboard is fitted around the pipework or if appliances restrict access. We discuss which items need moving and what protection is appropriate for the nearby floor and furniture. The work is planned around the property rather than treating every under-sink space as equally accessible.
Where a repair involves the water supply, the relevant isolation arrangement needs checking before the connection is disturbed. We ask what is known about the installation and whether a previous attempt to isolate it has revealed a problem. An ineffective or inaccessible valve can change the repair arrangements. We raise that issue when it becomes apparent and discuss any additional work instead of assuming the original component can simply be removed.
Taps and accessible supply fittings
A tap that will not stop dripping, a loose connection beneath a basin or a fitting that leaks during use needs assessment of the component and its installation. We inspect what is accessible and discuss whether a serviceable part can be replaced or whether the condition calls for a replacement fitting. The age and make of the tap, available parts and access beneath it can all affect that decision.
We use suitable hand tools for the connection and protect visible finishes where the work requires it. A component that looks similar is not automatically a compatible replacement. If you have already bought a tap, cartridge or other part, share the product details before the visit so that we can discuss suitability. We check the repaired fitting in operation and inspect the accessible connection for signs of water escape.
Sink wastes and blocked U-bends
A slow-draining sink can involve material held in an accessible trap, a poorly seated waste connection or a restriction further along the installation. We check what happens when the fitting is used and examine the accessible waste arrangement. The initial assessment helps distinguish a local trap problem from work that needs a different approach or access beyond the cupboard.
Where the agreed repair involves removing an accessible U-bend, we prepare to catch the remaining water and inspect the parts and seals. We clean or replace the relevant components as agreed, reconnect them correctly and check the arrangement during use. The condition of neighbouring pipework matters: a repair may reveal a damaged thread, hardened seal or connection that has been forced out of alignment. We explain those findings before additional replacement work.
Pipe connections and replacement parts
Accessible joints need a repair suited to the material, fitting and surrounding installation. We assess the condition of the connection and the pipe around it, not just whether a joint can be tightened. Corrosion, previous alterations or a component under strain can affect what is practical. We discuss the replacement parts and any nearby work needed to support a sound repair.
We keep the materials question separate from an online labour calculation. Parts, consumables and any agreed sourcing time need confirming for the actual job. If the work requires an item that is not available at the property, we discuss the next arrangement before proceeding. A photograph or basic dimension helps an enquiry, but it does not replace checking the compatibility of the part against the installation in front of us.
Checking the repair during normal use
We check the agreed fitting after reassembly and look at the accessible connections while it operates. For a sink waste repair, that includes observing the connection as the sink empties. For a repaired tap or supply fitting, we check its operation and the relevant accessible joint. We also explain any part of the installation that could not be inspected without further access.
A dry connection at handover does not make existing damage disappear. If water has affected the cupboard, wall or floor, we discuss the condition and the appropriate next service. Water damage restoration can involve extraction or drying, while flooring and painting and decorating deal with different finishes. Those repairs need planning around the cause and the readiness of the affected materials.
When the job needs a wider assessment
Some enquiries begin with a small visible leak but involve access, failed neighbouring components or previous alterations that cannot be understood fully from a photograph. We describe what we have found and what needs checking next. Opening a wall, removing a fixed unit or repairing a damaged finish is not silently included in a simple fitting repair. We discuss those requirements and agree the next work before proceeding.
For rented homes and managed properties, tell us who will provide access and who can approve a change to the proposed repair. We also need to know about parking restrictions, stairs and any building rules affecting the visit. If the enquiry covers a list of unrelated faults, our property maintenance service may help bring the work together, while electrical concerns need the appropriate electrical service.
BEFORE YOU BOOK
Questions about
the work.
Do you replace every dripping tap?
We assess the tap and the accessible installation before deciding what repair is appropriate. A serviceable component may be replaceable, but availability, compatibility and the condition of the fitting matter. We discuss the proposed work and parts rather than promising that every tap can be repaired in the same way.
Is a blocked sink always a U-bend problem?
No. We check the accessible waste arrangement and how the problem appears during use. A local trap obstruction is different from a restriction beyond the accessible fitting. We explain when the enquiry needs further investigation or a different arrangement instead of assuming that removing the U-bend will resolve every drainage issue.
Should I buy a replacement part before booking?
Share the product details if you already have a part. We need to check that it suits the existing fitting and connection. Similar appearance is not enough to establish compatibility. Where materials need sourcing, we discuss their cost and any supply time separately from the labour estimate.
What if the leaking connection is behind a fitted unit?
Tell us about the restricted access when enquiring and include a wider photograph where possible. We discuss what can be assessed from the accessible area and what may need removing or opening. Access work and making good are considered separately; they are not assumed to be part of a small fitting repair.
Can you confirm how long my plumbing repair will take online?
A dependable working time needs the fitting, condition and access assessed. The enquiry tool records the problem and quantity to help us review the work. If you enter a working time in the labour calculator, it is a budgeting input and still needs confirming for your job.
Can one enquiry include water damage and an electrical concern?
Yes. Describe both and explain which areas have been affected. We arrange the enquiry around the work and trades required. Plumbing repairs, electrical assessment and restoring a wet finish are different tasks, so we discuss their order and the access needed before agreeing a visit or a combined plan.
TELL US WHAT NEEDS DOING
Tell us what is leaking.
Show us the access.
Call 020 3746 0607 with the fitting, the fault and your postcode. We’ll discuss the repair, parts and available arrangements before you book.